Commercial subsonic ammo

[68WJ]

Now if I could just find some in commercial loads...

Good luck, start here: http://bridgercustomammo.com/index.html

[EGarza04]

Good luck, start here: http://bridgercustomammo.com/index.html

Will do. thanks for the lead...

[-k-]

You need to know the twist of your barrel before you get any ammo. Subsonic requires a faster twist than normal to stabilize the bullets, and many subsonic loads will use long heavy bullets that require even faster twist.

EBR has an expanding load.
http://www.ebr-inc.net/762ThumperSubsonic.html

[Wink23]

I would suggest EBR as well. They offer two loads, one for training and one expanding. The second one is the 7.62mm
NATO/.308 PBS - Precision Bonded Subsonic. Not to mention, its made right here in Texas.

[EGarza04]

An Update:

You need to know the twist of your barrel before you get any ammo. Subsonic requires a faster twist than normal to stabilize the bullets, and many subsonic loads will use long heavy bullets that require even faster twist.

EBR has an expanding load.
http://www.ebr-inc.net/762ThumperSubsonic.html

I would suggest EBR as well. They offer two loads, one for training and one expanding. The second one is the 7.62mm
NATO/.308 PBS - Precision Bonded Subsonic. Not to mention, its made right here in Texas.

Well we contacted EBR and ordered 100 rounds to start with and I hope they work well because the total was well over $700. I will probably get to test these out on live targets in the next 2-4 weeks. I likely will not be able to post photos because of legal reasons but I will let you know how well they did compared to the FMJs we have been historically using.