Reply With QuoteFancy lasers nothing! I could do that with a dremel in one hand and a beer in the other.
Great work and a clear example of the intricacy capable with their technology. It looks like you are only limited by imagination.
Ident Marking Photo Thread
I stopped by Ident Marking during a business trip to Dallas and had them do a surface engraving on one of my lowers. Aside from being a fun group of guys to hang out with they also happen to do fine work and have excellent prices considering the fact that they use some pretty fancy lasers to do the engraving. I saw several samples of things they have engraved and I thought it would be a good idea to post some pictures of work that folks have had done.
Here's my 6.8 SBR lower, marked with my avatar. The pictures were taken with my cell phone camera so they aren't the best. I'm going to be taking some better pictures later but this is at least a start.
Bugg77 (aka Jim)
2013 Kill Counter
1 piglet
Fancy lasers nothing! I could do that with a dremel in one hand and a beer in the other.
Great work and a clear example of the intricacy capable with their technology. It looks like you are only limited by imagination.
Last edited by 68WJ; 02-10-2012 at 10:41 AM.
6.8 SPC info sheet: https://docs.google.com/file/d/0Bx5t...it?usp=sharing
He has erected a multitude of New Offices, and sent hither swarms of Officers to harrass our people, and eat out their substance. - TJ
That is sweetness!!! I am going to have to get by there.
http://www.ar15techforums.com/BBS/index.php
train like your life depends on it, Because it does!
A closed mouth gathers no foot.
Posted by HTR:
They're smarter than dogs, warier than turkeys or deer, and more evil than a dungeon full of Mansons
That is amazing.
Are they limited to flat surfaces only or could they do a whole rifle? My first thought when I seen some of their work was a complete camo job on a rifle.
We are pretty much limited to a flat surface. We also have a limited marking field to worry about too. For Deep engraving its 3 in, and for a surface mark like above its 6 in. I will dig up some more sample pics.
Ident Marking
Engraving, Night Vision, Firearms, Thermals and Suppressors
www.identmarking.com
info@identmarking.com
(469) 464-5500
07/02 FFL/SOT
For Bugg or Ident~ What are the image requirements for this sort of job and how is the pricing structured?
I'll let Ident comment on most of that but I will say that a "vector" file is needed for the engraving program. I don't know if that means it has to be a CAD file or something else but I was fortunate enough that someone did the conversion of my avatar to a vector file.Originally Posted by Nswish
Also, I think Gordon might be able to create a vector file for you if you only have a jpg or other image format that doesn't include vector information. I'll let them say if they charge for that time and what else they have for a pricing structure.
Bugg77 (aka Jim)
2013 Kill Counter
1 piglet
Zestay !!!! Lookin' good there yer Buggness !!
Make yourselves sheep, and the wolves will eat you. -Benjamin Franklin
NRA Life Member
Certified Firearms Safety Instructor
A Gun's Two Biggest Enemies: Rust, and Politicians
Obama... don't go to Arizona, they require proof of Citizenship.
Politicians=Diapers: Full of the Same Thing and in Need of Frequent Changing.
You should SEE how tight my rifle groups single shots !!!
We prefer a Vector graphic ie... DXF, AI, CDR file. We can also convert a JPEG image but it needs to be a clean image.
Prices-
NFA SBR 2 line text- $45
Logo, surface mark- starts @ $65 and deep engraved starts @ $85. Logo pricing is will be based on file sent, size of logo and its complexity. Email a photo or drawing to us for a quote.
Return shipping- $15
Ident Marking
Engraving, Night Vision, Firearms, Thermals and Suppressors
www.identmarking.com
info@identmarking.com
(469) 464-5500
07/02 FFL/SOT
Thank you for the reply. Just tossing some things around right now, but that's good info that I'll keep on the front burner.
Posting Permissions
