WTS 6.8 AR bore guides

[BlakDog]

Not big enough to be a sponsor yet, so $1 from each guide sold will be contributed to this site

XXX edit 9-09-09 per Cold, I'll be sending another 2 guides for the December drawings in jui of the dollar per guide thing.
$ 25.00 delivered 1st class US mail. Postal Money Order, I'll wait a week for personel check, or add 1.00 to use paypal.
I also make bore guides in .223 and .308 , 9mm, 243 WSSm, etc, plus HK 91, 93, MP5...
skered53@yahoo.com for pictures or any questions.
Thanks, Derek Scott

[BlakDog]

I should add, I take US postal money order, those strange Walmart M.O.'s, will wait 1 week for a check to clear and also take paypal, just add another dollar to cover their fee.

I also made some AR take down push pins, delrin tipped crimped in a 223 case, they first 10 are just only $1 with a guide .

http://s227.photobucket.com/albums/dd265/skered53/?action=view&current=BlackAcetal.jpg

I think I fingered-out the pic thing
Here's a 6.8 with black acetal chamber insert on top.
next is 6.8 with white tip ( ran out of white, thought I'd try the black)
bottom os a 5.56 with white tip

http://i227.photobucket.com/albums/dd265/skered53/BlackAcetal.jpg[/IMG]

[BlakDog]

http://i227.photobucket.com/albums/dd265/skered53/quartrinchdrill.jpg[/IMG]

edit 10-22. Here's the end shot of the cap that can go on the rear of the 6.8 guide. it is drilled to .265" to reduce the opening from .305 to better center the rod along the bore axis. Since most 270 cal rods are actually about .250", the 265 give plenty of room and the PVC cap will not wear the coating on the rod. The tings in the guide and the cap are actually 1/4" drill bits to show how your rod would fit. I've sent quite a few of these out already with no complaints.

http://i227.photobucket.com/albums/dd265/skered53/cap.jpg[/IMG]



http://i227.photobucket.com/albums/dd265/skered53/Aug1acetal.jpg[/IMG]
Here's a original cap, it's 1" diameter as compared to the new ones that are 3/4" diameter, anyhow it shows how it works.
The threaded section of delrin has been replaced with a nylon 1/4" bolt.

For those either getting a 5.56 guide or using a 22 cal rod on our 6.8, I also make a cap with a .212" hole ( My Dewey rod measure .204") I can drill it to .219" if you want.
The cap adds .50c to the order ( this way I'm not sending you something you don't want or won't use )

10-22 edit over. *********



OK, one guide going to OK zip 73099.
another going to Tenn. zip 37020


Plus I'm now a team member, and pending Mod approval, I will donate a guide to the next member's drawing.

I did get approval, so I'll be sending a guide to Cold for the next drawing, think I'll throw in some of the take down pin delrin pushers I made.

Aug 6th edit
Gratis guide sent to Cold to check out,

plus another guide sent to zip 87155, that's 3 so far
and another pending .... this will be # 4

[jasonpeterson]

Tried it out today. Works very well!!!

[Sak007]

Im good for 1 6.8 guide.

[kamojo]

I'll take a 6.8 guide.

[244]

BLAKDOG:

Does your guide to be used from the muzzle or from the chamber? One of your posts mentions a tube, but I don't see it from the picture. Your avatar confuses me, but I admit that is often not hard to do!

I'll email you for a picture, but maybe you could add one to this thread (and of your pin pusher) too?

Thanks!

[BlakDog]

Try this link to a post with more pics:
http://68forums.com/forums/showthread.php?t=7059&highlight=cleaning

Thanks to Jason for posting them.

SAK007, PM sent
kamojo, will send PM
224, I will fwd an e-mail I just sent with pics to you right now.

[mrmisogany]

I'll take one 6.8 guide sir. Thank you

[BlakDog]

I'll take one 6.8 guide sir. Thank you


E-mail sent thru site. Payment received .

Derek.

# 4 went to TX 78155 last week, Thanks for the YEARS of Service Major !.

Guides will be mailed to the following zip codes tomorrow
# 5 going to 39459
#6 to 85024
#7 to 34983
# 8 pending funds to Texas

[244]

Derek- Email sent with questions. Thanks.

[BlakDog]

224, E-mail replied to.

5 6 & 7 mailed today.

# 8 is a three guide package ( 223, 6.8 & 308 ) so it will count as 8 , 9 & 10.

[244]

Derek, payment sent for one 6.8 and one 6.5 Creedmoor. Thanks!

[ron169]

Derek do we sent the payment via paypal to skered53@yahoo.com ?

[244]

Derek do we sent the payment via paypal to skered53@yahoo.com ?

I sure hope so! If not, someone else got a nice surprise from me. :)

[MichiganMilitia]

PM sent with questions.

[BlakDog]

M Militia, LOOONg winded reply sent via PM.

ron169 yes, that is my pp account , discreet less them find me out and canx my account, mi no think dem too gun-friendly ifin yu know what i mean.......

224, funds received for the 6.8 and 6.5 , they are almost done,
I sent you a querry via e-mail

[ron169]

Payment sent from ron169@yahoo.com for a 6.8mm SPC boreguide

[BlakDog]

Brau Ron, PP received, I sent you an e-mail with a question re rod size ( cleaning rod ! )

Guide sent Sacramento, and another sent to Sam Mateo today, Thanks Guys. #11 & 12
Hey shipped 1st class US mail

224, guides ready to ship tomorrow ( Guides # 13 & 14 )

When ron169's ships, that will be # 15.

Had to make an immergency run to the hardware store today.

[ron169]

Derek, Im not exactly sure of the cleaning rod size. It is a Dewey one piece coated rod for caliber .270 and larger. its model number is 30c-36

[MichiganMilitia]

pm sent with more questions... lol :rolleyes:

[45to40]

Received mine - nice work. Gotta love that little "button pusher" extra you threw in, here in CA. And that red tape, I felt like it was Christmas. You're the man ! http://68forums.com/forums/images/icons/icon10.gif

[MichiganMilitia]

another PM sent. Thanks for being so helpful Derek.

[BlakDog]

Received mine - nice work. Gotta love that little "button pusher" extra you threw in, here in CA. And that red tape, I felt like it was Christmas. You're the man ! http://68forums.com/forums/images/icons/icon10.gif

a few months ago I had some green tape to use with the red, it really looked like late Christmas packages.

Glad you like it, tell all your shootin' buds !

Hi Ya'll I e-mailed Cold and he's declined the dollar per bore guide sold and thanked me for the offer. I will be sending another two 6.8 guides for the next member drawing in Dec.


Folks on Gunbroker are paying 23.99 plus 5 shipping = 28.99 for the same guide .. SHHH ! don't tell them.
http://www.gunbroker.com/Auction/ViewItem.asp?Item=137725433
Also, I have A+ feedback there

Thanks for the orders to date.
Derek

[reverendbiker]

Order sent via Paypal.

[BlakDog]

pp payment received, check oyur e-mail for a question I asked.

Thanks, Derek

[MichiganMilitia]

Also sent PP money this afternoon. Can't wait to get it! :a04:

[BlakDog]

It'll be mailed tomorrow morning.
Thanks for the order and THANKS for your future Service.
Two guides going in the mail tomorrow.

[MichiganMilitia]

Don't thank me yet... All I'm doing is going to school so I can get commissioned. :rolleyes:

[jdgilbert]

Got mine yesterday Derek, thanks much, fast service works perfectly. Nice design. Will definitely refer my buddies to you.

[kamojo]

Got mine a few weeks ago...I've used it several times and it works great. Thanks!!!

[BlakDog]

Got mine a few weeks ago...I've used it several times and it works great. Thanks!!!

Thanks for the good words Ya'll. I still have two each 1' anodized 6.8 sized tubes( from hardware store) left before I order some more on the basic tubing ( 6 foot from on-line catalog).

[reverendbiker]

Received mine in the mail today and put it right to work. Well designed, well constructed. Best of all, well worth the price!

[MichiganMilitia]

I got mine in the mail today! It looks great! very well constructed and well worth it!

Derek, check your PMs Thanks!

[dessl]

Put me down for one 6.8 guide. Pm your email for paypal.

[BlakDog]

dessl scooped up the last one.

Ordering more tubing and acetal on-line later. UPS ground should have it here by Wed or Thursday.

September 4th will bring a $ 2.00 price increase, these will be then $ 25.00 delivered ( $ 26.00 delivered with paypal)

Any orders placed before then get the current price.

Thanks again folks.


Bore-Guide-Derek

[BlakDog]

Parts are in, have a couple more ready to go.

[zach318]

Thanks again for the bore guide it works great. Super fast shipping, great price, awesome bore guide and a great guy to buy from. thanks again, zach

[zepheris.hk]

I sent you an email for 3, please let me know.

Thank you,
Zepheris

[BlakDog]

Ahh, another fan of the FGS !.
Replied with an e-mail re the 3-pack.

My FGS consist of the 93 clone, P7, P9S and a steel/plastique mix P2000.

[Pootie]

Received the bore guide etc. today - thanks for the prompt service and the extras!

[houser52]

BlakDog- you have an email. Thanks

[BlakDog]

Thanks Pootie.
houser52, e-mail returned. guide with black front ready for mailing tomorrow.

[houser52]

email sent

[houser52]

Got my bore guide today. Very good customer service and fast.
It looks good but I'll have to wait til my upper gets back from Bison before I can try it out.

[BlakDog]

Hey Guys, I finally got a great job, started 3 weeks ago, so, I'm just doing the guides on the week-ends.
MANY THANKS for all the support, I hope all the guides are still in use, Happy Holidays.

[inalabama]

Hey Guys, I finally got a great job, started 3 weeks ago, so, I'm just doing the guides on the week-ends.
MANY THANKS for all the support, I hope all the guides are still in use, Happy Holidays.
pm sent...

[inalabama]

:a01: +1-Blakdog Bore guide!
well made and works great!!!!!!!!!!!!!!!

[Marine nload]

Please excuse my ignorance but I haven't had any experience with bore guides. It would appear to me that the flash suppressor would act as a bore guide. Obviously I am missing something here. Also I clean my weapons from the chamber area.

[Jamesb74]

The bore guide goes into the chamber area protecting it from the steel and rod.

[BlakDog]

Thanks inalabama !. Nice Football team BTW ;-)

The flash uppresor is much to wide to prevent you from pulling the steel cleaning rod gainst the sides of your barrel crown.

If anyone's getting ready to deploy with their 5.56 stick, let me know an I can send you one at cost plus shipping. Military address's only. as my cousin says. GFB !

[BlakDog]

Still have the tubes to make these if anyone needs any.
Also, offer to Active Duty pre-deployment types stands.$10 delivered to APO , FPO boxes or military unit.

[dhurt]

Email sent.
Thanks

[bespain]

I would like a 6.8 and a .223 bore guide (both using a .223 cleaning rod) plus a pin pusher. Please PM me your payment info.

Thanks,
Brian

[commando57]

I want a 6.8 what do I do?

[bespain]

I received my guides and pin pusher. Thanks for the quick service.
Now I just have to go shoot so that i'll have a reason to use them.

Take it easy,

Brian

[shooter_from_show-me]

You still making these? Or should I just buy a Dewey bore guide from Brownell's.

Thanks

Bill

[shooter_from_show-me]

Umm, guess he isn't doing this anymore. Oh well, I bought one (Dewey) from Brownells for $19 and some change.

Bill

[tbready]

Here is his actual e-mail:

skered53@yahoo.com

Hope this helps.

[gregh]

BlackDog,
I have a 6.8 variant, it is a 25 DTI , a 6.8 necked down with the shoulder blown out. Can you make a guide for this one?
Thanks in advance
Greg Harrison

[gregh]

Blak dog,
Can you make one for a 6.8 variant, the 25 DTI, a necked down 6.8 with the shoulder blown out?
Thanks in advance
Greg Harrison

[angsniper]

Blak dog,
Can you make one for a 6.8 variant, the 25 DTI, a necked down 6.8 with the shoulder blown out?
Thanks in advance
Greg Harrison

Blakdog has not been on the site since Sept. 2010

[gregh]

Thanks for the update I never looked at the date. Do you know of anyone makeing custom boreguides!
Thanks
Greg

[346CI]

Mike Lucas is fixing to fire up a batch, about 1 month out. I'm PM you his email if needed, let me know.