SSA New Items In Stock -Pro Hunters In Stock

[modernarms]

Good news, new items and Pro Hunters back IN STOCK on SSA website:

6.8SPC 110gr Sierra Pro Hunters http://www.ssarmory.com/6.8_spc_ammo-2-1-1-1-1.aspx
CCI #41 Small Rifle Primers http://www.ssarmory.com/cci41smallrifleprimernato.aspx
CCI #34 Large Rifle Primers http://www.ssarmory.com/cci34largerifleprimernato.aspx
6.8SPC Brass Cases, Large Rifle Primer http://www.ssarmory.com/68spcunprimedbrasscaseslargeprimer.aspx
6.8SPC Brass Cases, Small Rifle Primer http://www.ssarmory.com/68spcunprimedbrasscases.aspx

Also, lots of 5.56mm becoming available http://www.ssarmory.com/556ammunition.aspx

[Strawdawg]

Thanks! :)

[constructor]

Follow those links and read close you'll be glad you did.

[RoAus]

All I can say is...Thank you Art! :D I'm glad I waited :shock:

[signal5]

Follow those links and read close you'll be glad you did.


What does this mean?

[constructor]

Follow those links and read close you'll be glad you did.


What does this mean?
Did you follow the link? Did you notice the price of the brass?

[dark1]

1 to 999 $42.08 now for the 68forons ammo pricing.... i do not have my reloading press yet i gut a case of receivers with the cash i was going to get my dillin with :(

[rushca01]

I PM'd Art the other day and he said to hold off ordering as the discount would be coming!! I am debating whether or not to order now or when I get back from Hawaii, they may be gone by the time I get back or at least the pricing but I don't want my orders sitting on my porch for 10 day....ahhhhh!

[modernarms]

You should be OK on the brass, but I wouldn't wait too long to order the Pro Hunters. Projectiles are hard to get right now.

[Jamesb74]

1 to 999 $42.08 now for the 68forons ammo pricing.... i do not have my reloading press yet i gut a case of receivers with the cash i was going to get my dillin with :(

Take some money and buy a sngle stage kit and the brass. If you know that you are going to be reloading then buy the brass now and get the reloader later.
I know it is tough being on a budget. I need optics for two rifles and I am spending all my money on these deals.

[Jack-O]

I PM'd Art the other day and he said to hold off ordering as the discount would be coming!! I am debating whether or not to order now or when I get back from Hawaii, they may be gone by the time I get back or at least the pricing but I don't want my orders sitting on my porch for 10 day....ahhhhh!


never do today what you can put off for tomorrow!!

[lead2thehead]

Well this kinda stinks :x. I was waiting and waiting, had some(500) brass in my shopping cart a couple of weeks ago and then the price jumped up. Figured I better buy while I could still get it so I did and now it's back down :( . Good for some I guess.

Lead2thehead

One Big Ass Mistake America

[Strawdawg]

Well this kinda stinks :x. I was waiting and waiting, had some(500) brass in my shopping cart a couple of weeks ago and then the price jumped up. Figured I better buy while I could still get it so I did and now it's back down :( . Good for some I guess.

Lead2thehead

One Big Ass Mistake America


Least I only bought a 100 a few days ago :D

[Tim_W]

Factor out how much extra you spent when you figure 15 reload per case and you really didn't spend much. The case is 10x less the cost of the bullet when you count even min number of reloads.

What I want to know is whats the deal with large primer brass again. Is this old stock or have you been making large primer for the Mil all along as that was one of their original mandates.

Thank you Art and others for bringing the price to a more affordable level.

[Colohunter]

Sweet deal, I bought two hundred small primer cases and a couple boxes of the 110gr Pro Hunter. I will be ready to go when I get the last parts for my build. Mainly just waiting for a midlength gas tube, come on Brownells!!!

[ceylonc]

Take some money and buy a sngle stage kit and the brass. If you know that you are going to be reloading then buy the brass now and get the reloader later.
I know it is tough being on a budget. I need optics for two rifles and I am spending all my money on these deals.

I completely agree! I'm doing the same thing. My idea is optics, etc. will always be around & pricing isn't as volitile. Reloading components and magazines are in short supply with prices virtually assured of more instability. I figure, stockpile while you can because it isn't going to ever get cheaper in the future...

[Strawdawg]

Factor out how much extra you spent when you figure 15 reload per case and you really didn't spend much. The case is 10x less the cost of the bullet when you count even min number of reloads.

What I want to know is whats the deal with large primer brass again. Is this old stock or have you been making large primer for the Mil all along as that was one of their original mandates.

Thank you Art and others for bringing the price to a more affordable level.

That is okay, I ordered some more and averaged down! :mrgreen:

[ron169]

Factor out how much extra you spent when you figure 15 reload per case and you really didn't spend much. The case is 10x less the cost of the bullet when you count even min number of reloads.

What I want to know is whats the deal with large primer brass again. Is this old stock or have you been making large primer for the Mil all along as that was one of their original mandates.

Thank you Art and others for bringing the price to a more affordable level.

Tim, Art said in a different thread that he was going to do a special run of 20K since noone could find any Remington LP brass

[kalwasart]

Factor out how much extra you spent when you figure 15 reload per case and you really didn't spend much. The case is 10x less the cost of the bullet when you count even min number of reloads.

What I want to know is whats the deal with large primer brass again. Is this old stock or have you been making large primer for the Mil all along as that was one of their original mandates.

Thank you Art and others for bringing the price to a more affordable level.


We have had a lot of request for large primer brass in 6.8, and still some load charts show the large primer. There are still some 6.8 owners who do not really follow trends or this forum so all they know is Remington Brass, Or it just might be a good marketing ploy to capture that much more of the market.


Art - SSA

[BLACK LION]

Hey ART, good job adding that tactical load selection box and bubble... :wink: